PRODUCT Description
A special cement adhesive for bonding water-absorbing structural elements such as thermostone (foam cement) with high adhesion strength and the ability to withstand high and low temperatures.
- Installation and bonding of materials used in construction such as foam cement and other materials that absorb water (blocks or bricks).
- High adhesion and bonding strength.
- Resistant to deformities in the event of temperature changes.
- Affordable cost
- Easy to spread
1- Preparation of substrate :
- - The surface must be solid and free of the residue of all kinds (cement, coating, oil materials, dust, etc...) It must be completely dry.
2- Mixing
- AddAKRE GAZ CONCRETE 2056
slowly to the amount of clean water in the mixing bowl (25% water ratio) while avoiding adding any other substances during mixing, then mix using a low-speed mechanical mixer, quietly and for 2 minutes until we reach a homogeneous mixture, free of clusters, let the mixture rest for 2 minutes, then re-mix for (30-60 min), and the mixture is ready to apply.
- 3- Installation :
Spread the mortar with a suitable trowel (10x10x10 mm) on the surface and install the blocks. Ensure that the mortar fills the vertical and horizontal joints so that the joints are at most 3 mm. The thermostone blocks can be adjusted after the installation in 10-15 minutes depending on the installation conditions and the material used in the construction. The consumption depends on the case and usage.
Post-application recommendation:
- Do not use the remaining mortar after the time of its validity in the bowl.
- It should be kept away from water for 24 hours after installation.
Cleaning: :
- Clean equipment and hands with direct water
- Clean the surface of the stuck material after installation with a wet cloth.
Storage:
- Storage in relatively dry warehouses away from humidity and direct sunlight.
- No more than 10 bags should be placed on top of each other during storage.
- Shelf life 12 months in appropriate conditions.
Packaging:
- Multi-ply paper bag 25 kg.
Safety recommendations:
AKRE GAZ CONCRETE 2056 is a cement chemical compound containing substances that cause eye irritation and skin sensitivity so the following safety instructions must be adhered to:
- Wear gloves and goggles while working.
- Wear masks to protect respiratory health.
- Any scratch on the skin or eyes should be treated with pure water immediately.
- If the substance is ingested by mistake, a doctor must be checked immediately without attempting to stimulate vomiting.
|
Technical Properties |
|
| Appearance | powder |
| Color | Gray |
| Adjusting time | 10-15 min |
| POT Life in the bowel | 5 Hours |
| Pressure strength | ≥ 5 N/mm2 |
| Water ratio | 25 % |
